Forum FlexPro – Discuss your topic!

adding coordinate values into text

Accueil > Community > General > adding coordinate values into text

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #12572
    Dermot CraddenDermot Cradden
    Participant

    Is it possible to create a text object with the value of a cursor embedded? And have that value change when the cursor position changes.

    #8235
    Dermot CraddenDermot Cradden
    Participant

    Is it possible to create a text object with the value of a cursor embedded? And have that value change when the cursor position changes.

    #8923
    Bernhard KantzBernhard Kantz
    Participant

    That’s possible as long as the cursor is active. If you use a label in a 2D-diagram you can automatically update the content (cursor position). Activate the option Update windows (Diagram Properties|Cursors). The Update windows specifies that the the window is to be refreshed after every cursor move. Select this option if you display data sets, which refer to the actual cursor positions, in the same window.

    Example: Cursor position of the active cursor in the diagram ‘2DDiagram’

    
    %{'2DDiagram.2D'.Cursor(fpCursorActive, 1).PositionIndex}
    

    Example: Y-value of ‘Signal’ at the current cursor position

    
    %{Signal['2DDiagram.2D'.Cursor(fpCursorActive, 1).PositionIndex]}
    

    support@weisang.com

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.