Skip navigation
MyWeisang
MyWeisang

Account settings
MyWeisang
Logout

Topic

Transfert function

Home page › Community › General › Transfer function

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 03.11.2009 at 01:43 #33798
    mathias andriamisaina
    Participant

    Hi,

    I would like to trace the bode diagram (amplitude and phase) after calculating transfert function between an input and an output signal.

    How can I do that with flexpro 8 ?

    Thx for help

    NNRZ

    03.11.2009 at 01:43 #33800
    mathias andriamisaina
    Participant

    Hi,

    I would like to trace the bode diagram (amplitude and phase) after calculating transfert function between an input and an output signal.

    How can I do that with flexpro 8 ?

    Thx for help

    NNRZ

    03.11.2009 at 18:20 #33799
    Bernhard Kantz
    Participant

    You can calculate the phase response and the amplitude response with the [b]Fourier Cross Spectral Analyis Object (Spectral Analysis Option)[/b]. Select your input and output signal in the object list and choose [b]New|Spectral Analysis|Cross Spectrum[/b]. Choose the Spectral Procedure [b]Transfer Function[/b] and the Spectrum Type [b]Amplitude[/b] or [b]Phase[/b]. After that you could create a 2D-Diagramm with the amplitude response and the phase response.

    support@weisang.com

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.